Accuray Mechanical

Voted Best HVAC Company

Air Conditioning Installation

Featured Savings

With savings this good, there is no excuse not to get started!
Free Estimates
Senior Citizen Discounts
Veteran Speical Discounts

Understanding the process of AC installation is vitally important for homeowners to ensure a smooth and successful experience. Here's what you should know about AC installation as well as steps for finding professional AC installers.

Process of AC Installation:

Initial Assessment: The AC installation process starts with an assessment of your home's cooling needs by a professional HVAC technician, who will consider such factors as square footage, insulation levels, existing ductwork systems, and any specific requirements or preferences that exist to create an accurate picture of what will work for each household.

Sizing Calculation: Based on their assessment, technicians will calculate the appropriate size and capacity of an air conditioning system required to efficiently cool a home. Proper sizing ensures optimal performance as well as energy efficiency.

Equipment Selection: Once the sizing calculations have been finalized, both homeowner and technician should discuss available AC system options based on factors such as energy efficiency ratings, features, and budget constraints.

Prep Work: Before installation, the technician will begin by prepping both home and work areas by clearing space around indoor and outdoor units, protecting flooring and furniture, and providing access to electrical and plumbing connections.

Installation Planning: Our technician will develop an in-depth installation plan, taking into account your home layout and where indoor and outdoor units will be placed, routing of refrigerant lines (if applicable), compliance with local building codes, regulations, and codes of ethics as well as compliance with any building permits necessary.

Indoor Unit Installation: The indoor unit, consisting of the evaporator coil and air handler, should be strategically installed within your home - perhaps in the utility room, attic, or closet. Once mounted securely and connected with existing ductwork or air distribution systems.

Outdoor Unit Installation: The outdoor unit that houses the compressor and condenser coil will be placed in an appropriate location outside the home, such as on a concrete pad or mounting brackets. A technician will ensure proper leveling and anchoring to prevent vibration and noise levels from fluctuating unnecessarily.

Refrigerator Line Installation: Refrigerant lines are installed between indoor and outdoor units to facilitate heat and cooling transfer between them, with professional installation ensuring energy losses are kept to a minimum and efficient operation is ensured. The technician will carefully route and insulate these refrigerant lines to maximize the efficiency of operation and ensure smooth running operation.

Installation Planning: Our technician will develop an in-depth installation plan, taking into account your home layout and where indoor and outdoor units will be placed, routing of refrigerant lines (if applicable), compliance with local building codes, regulations, and codes of ethics as well as compliance with any building permits necessary.

Indoor Unit Installation: The indoor unit, consisting of the evaporator coil and air handler, should be strategically installed within your home - perhaps in the utility room, attic, or closet. Once mounted securely and connected with existing ductwork or air distribution systems.

Outdoor Unit Installation: The outdoor unit that houses the compressor and condenser coil will be placed in an appropriate location outside the home, such as on a concrete pad or mounting brackets. A technician will ensure proper leveling and anchoring to prevent vibration and noise levels from fluctuating unnecessarily.

Refrigerator Line Installation: Refrigerant lines are installed between indoor and outdoor units to facilitate heat and cooling transfer between them, with professional installation ensuring energy losses are kept to a minimum and efficient operation is ensured. The technician will carefully route and insulate these refrigerant lines to maximize the efficiency of operation and ensure smooth running operation.

Electrical Connection: Air conditioner systems require electrical connections between indoor and outdoor units, thermostats, and controls to function. A technician will make these connections according to manufacturer specifications and local electrical codes.

Condensate Drain Installation: Installing a condensate drain line will remove excess moisture from an indoor unit and protect it against water damage. Our technician will ensure proper drainage and insulation to avoid clogs or leaks in this condensate line.

Testing: Once the installation has been completed, a technician will conduct rigorous system testing of your AC system to ensure its optimal operation - including airflow testing, refrigerant charge testing, electrical connections testing, thermostat settings adjustments, and temperature control testing.

Startup and Commissioning: Following testing, the technician will begin commissioning the AC system by fine-tuning settings, calibrating controls, and verifying all components are functioning appropriately.

Air Balancing: Your technician will conduct air balancing to ensure an even distribution of cooled air throughout your home, which may involve adjusting dampers, registers, or diffusers as necessary to maximize comfort and efficiency.

Final Inspection: Once installation has been completed, a final inspection should be performed to ensure compliance with all relevant building codes and regulations. Any deficiencies or issues identified during this final check will be addressed immediately before concluding installation.

Owner Orientation: A technician will provide the homeowner with an orientation on how to operate and maintain their new air conditioning system, such as changing air filters, adjusting thermostat settings, and scheduling routine maintenance services.

Documentation: Homeowners will receive documentation such as warranty information, installation manuals, and service records to maintain as part of their records for future maintenance or warranty claims. This documentation serves as an important resource when seeking service or warranty claims in the future.

Cleanup: Once installation has concluded, any debris, packaging materials, or tools from the home will be collected and removed by a technician to leave your home in its pre-installation state or better.

Follow-Up: Following installation, an HVAC company should check back with homeowners to make sure their satisfaction with their new air conditioner is assured and address any queries or issues that arise.

Maintenance Recommendations: Your technician may suggest scheduling regular maintenance services to keep the AC running efficiently and extend its lifespan, such as tune-ups, filter replacements, and coil cleanings. This may include annual tune-ups, filter changes, and coil cleanings.

Customer Satisfaction: Professional HVAC companies place great importance on customer satisfaction during all stages of installation - from initial consultation through final walkthrough. Their aim should be to exceed homeowner expectations while creating a positive experience from start to finish.

Documentation: Homeowners will receive documentation such as warranty information, installation manuals, and service records to maintain as part of their records for future maintenance or warranty claims. This documentation serves as an important resource when seeking service or warranty claims in the future.

Cleanup: Once installation has concluded, any debris, packaging materials, or tools from the home will be collected and removed by a technician to leave your home in its pre-installation state or better.

Follow-Up: Following installation, an HVAC company should check back with homeowners to make sure their satisfaction with their new air conditioner is assured and address any queries or issues that arise.

Maintenance Recommendations: Your technician may suggest scheduling regular maintenance services to keep the AC running efficiently and extend its lifespan, such as tune-ups, filter replacements, and coil cleanings. This may include annual tune-ups, filter changes, and coil cleanings.

Customer Satisfaction: Professional HVAC companies place great importance on customer satisfaction during all stages of installation - from initial consultation through final walkthrough. Their aim should be to exceed homeowner expectations while creating a positive experience from start to finish.

Things You Can Do to Ensure You’re Hiring a Professional AC Installation Company:

Credentials and Certifications: Make sure the HVAC company you select is licensed, bonded, and insured as well as their technicians possessing relevant certifications and training.

Experience and Expertise: Look for an AC installation company with proven success at installing ACs into homes similar to your own.

Referrals and Reviews: Evaluate online reviews as well as references from past customers to get an accurate picture of customer satisfaction with any company. Transparent Pricing: When seeking companies that provide transparent pricing with no hidden fees or surprises, transparent pricing is always a necessity.

Written Contracts: When selecting an AC company, ensure they offer written contracts addressing scope, timeline, and payment terms in order to protect both parties involved.

Quality Equipment: When shopping around for companies using high-quality and reputable AC equipment known for reliability and efficiency.

Customized Solutions: Select a company that provides customized cooling solutions tailored to the unique cooling requirements and budget constraints of your home. Energy Efficiency: Opt for energy-saving AC systems from companies that prioritize energy-saving measures as a way of lowering utility costs and environmental impacts.

Professionalism: Evaluate the professionalism of each technician employed by the company, such as punctuality, appearance, and communication skills. Safe Practices: Verify that this company abides by stringent safety practices to protect both workers, homeowners, and property during installation.

Compliance with Codes: Before hiring any AC installation company, check that they comply with local building codes and regulations regarding AC installation to avoid compliance issues.

Warranty Coverage: Make sure the company provides warranty coverage for both parts and labor to give yourself peace of mind and protect your investment.

Emergency Services: Select an AC repair service provider that offers emergency AC repairs with 24-hour support so urgent issues can be addressed quickly.

Educational Resources: When shopping for AC installation and maintenance companies, look for companies offering educational resources and guidance so homeowners can make informed decisions.

Accreditations: Before hiring, take time to verify if a contractor holds accreditations from respected organizations like Better Business Bureau (BBB) or Air Conditioning Contractors of America (ACCA).

Warranty Coverage: Make sure the company provides warranty coverage for both parts and labor to give yourself peace of mind and protect your investment.

Emergency Services: Select an AC repair service provider that offers emergency AC repairs with 24-hour support so urgent issues can be addressed quickly.

Educational Resources: When shopping for AC installation and maintenance companies, look for companies offering educational resources and guidance so homeowners can make informed decisions.

Accreditations: Before hiring, take time to verify if a contractor holds accreditations from respected organizations like Better Business Bureau (BBB) or Air Conditioning Contractors of America (ACCA).

Transparent Communication: Choose a company that communicates openly and transparently during the installation process, keeping you apprised of progress as well as any updates or modifications.

Satisfaction Guarantee: Look for a company that provides a satisfaction guarantee or commitment to resolving any issues or concerns in a satisfactory manner. Local Reputation: Investigate how well-regarded their reputation is within your community and whether they take part in community events or charitable initiatives.

By following these steps, homeowners can identify professional AC installation companies that prioritize providing exceptional service and providing positive experiences for their customers. Spending the time and effort selecting an HVAC company could result in successful cooling comfort installations that provide long-term reliability.

SCHEDULE AN APPOINTMENT TODAY!

Trust the experts with 22 years of experience.

Financing

COMPREHENSIVE SERVICE BY SKILLED MECHANICAL PROFESSIONALS

Accuray Mechanical serves New Haven County, Connecticut and the surroundings, offering honest service.

Out of our radius? Give us a call and we’ll do our best to accommodate you!

Proudly Serving Areas

COMPREHENSIVE SERVICE BY SKILLED MECHANICAL PROFESSIONALS

Accuray Mechanical serves New Haven County, Connecticut and the surroundings, offering honest service.
Out of our radius? Give us a call and we’ll do our best to accommodate you!
Proudly Serving Areas

Book An Appointment